mdp-16 Vishay, mdp-16 Datasheet - Page 4

• Manufacturer Part Number: mdp-16
• Description: Thick Film Resistor Networks, Dual-in-line, Molded Dip, 01, 03, 05 Schematics
• Manufacturer: Vishay

Document Number: 31511
Revision 06-Aug-02
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
CONDITIONS
1.5 rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hours
5 cycles between - 65°C and + 125°C
2.5 x rated working voltage 5 seconds
45 minutes at full rated working voltage at - 65°C
240 hours with humidity ranging from 80% RH to 98% RH
Leads immersed in + 350°C solder to within 1/16" of device body for 3
seconds
Total of 18 shocks at 100 G's
12 hours at maximum of 20 G's between 10 and 2,000 Hz
1000 hours at + 70°C, rated power applied 1.5 hours “ON, 0.5 hour “OFF” for
full 1000 hour period. Derated according to the curve.
4.5 pound pull for 30 seconds
10,000 Megohm (minimum)
No evidence of arcing or damage (200 VRMS for 1 minute)
± 4 hours at + 25°C ambient temperature
Thick Film Resistor Networks, DIP, Molded
For Technical Questions, contact: [e-mail]
(Typical Test Lots)
MDP 14, 16
Vishay Dale
± 0.50% ∆R
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.50% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 0.25% ∆R
± 1.00% ∆R
± 0.25% ∆R
MAX.
www.vishay.com
—
—
∆
R
43