ftlx1451f2 Finisar Corporation., ftlx1451f2 Datasheet - Page 8

• Manufacturer Part Number: ftlx1451f2
• Description: Rohs-6 Compliant 1310nm Xpak Transponder
• Manufacturer: Finisar Corporation.

FTLX1451 Product Specification – November 2007
Environmental Performance
Operating case temperature:
Operating humidity:
Fibers and Connectors
The transponder has SC receptacles for both Tx and Rx. The transponder is designed for
multimode SC cables, 0° polished endface (PC).
70-pin Connector
The module interface connector is a 70-pin, printed circuit board edge connection with a
0.5 mm pitch. The appropriate mating connector for the customer PCB is a 70-pin SMT,
dual row, right angled, edge connector, 0.5 mm pitch (Tyco Electronics part number
1367337-1, Molex part number 74441-0003 or equivalent).
Cage Requirement
The cage assembly required to mount the XPAK module is defined by the MSA. Finisar
recommends the low profile design –For correct operation and implementation always
follow the manufacturer’s datasheet.
A recommended XPAK rail assembly is Molex part number 74732-0220..
Aqueous Wash
Finisar XPAK Transponders are neither solderable nor aqueous washable and are not
intended for these processes.
Feature
ESD:
Electrostatic Discharge to the
Electrical Pins (HBM)
Immunity:
Against Electrostatic Discharge
(ESD) to the Module Receptacle
Immunity:
Against Radio Frequency
Electromagnetic Field
Emission:
Electromagnetic Interference
(EMI)
© Finisar Corporation – November 2007 Rev. B
VI. Regulatory Compliance
Standard
EIA/JESD22-A114-B
(MIL-STD 883D
Method 3015.7)
EN 61000-4-2
IEC 61000-4-2
EN 61000-4-3
IEC 61000-4-3
FCC 47 CFR
Part 15, Class B
EN 55022 Class B
CISPR 22
0°C to +70°C
0% -95% RH non-condensing
Comments
Class 1a (> 500 V)
Discharges ranging from
to the front end / faceplate / receptacle cause
no damage to module (under recommended
conditions).
With a field strength of 10 V/m, noise
frequency ranges from 10 MHz to 2 GHz.
No effect on module performance between
the specification limits.
Noise frequency range:
30 MHz to 40 GHz
Radiated emission does not exceed specified
limits when the module is measured inside a
shielding enclosure with an MSA
conforming cutout.
±
2 kV to
±
25 kV
Page 8