ns3l183rt-h3 NICHIA CORPORATION, ns3l183rt-h3 Datasheet - Page 7

• Manufacturer Part Number: ns3l183rt-h3
• Description: Nichia Chip Type White Led General Lighting-surface Mount Type Led , Ns3l183rt-h3 Smt Led
• Manufacturer: NICHIA CORPORATION

· Warpage of circuit board with soldered LEDs may result in damage or package breakage of the LEDs.
· Depending on the position and direction of LED, the mechanical stress on the LED package can be
· When separating the circuit boards with soldered LEDs, please use appropriate tools and equipment.
Please pay special attention to the orientation of the LEDs as to avoid LED failure caused by bow, twist
and warpage of the board.
When mechanical stress from the board affects the soldered LED, place the LED in the preferable
location and orientation as shown above.
changed. Refer to the following figure.
Hand brake without these tools and equipment may not be used.
Perforated line
【Non-preferable】
Cathode mark
Stress : A > B > C > D > E
Ａ
Ｄ
Ｂ
-6-
Ｃ
Ｅ
Slit
【Preferable】
Nichia STS-DA1-0878
Cathode mark
<Cat.No.090629>