w78c032c Winbond Electronics Corp America, w78c032c Datasheet - Page 7

• Manufacturer Part Number: w78c032c
• Description: 8-bit Mcu Series 80c51-based
• Manufacturer: Winbond Electronics Corp America

5.3.2
When the PD bit of the PCON register is set, the processor enters the power-down mode. In this
mode all of the clocks, including the oscillator are stopped. The only way to exit power-down mode is
by a reset.
5.3.3
The external RESET signal is sampled at S5P2. To take effect, it must be held high for at least two
machine cycles while the oscillator is running.
An internal trigger circuit in the reset line is used to deglitch the reset line when the W78C032C is
used with an external RC network. The reset logic also has a special glitch removal circuit that ignores
glitches on the reset line.
During reset, the ports are initialized to FFH, the stack pointer to 07H, PCON (with the exception of bit
4) to 00H, and all of the other SFR registers except SBUF to 00H. SBUF is not reset.
Power-down Mode
Reset
- 7 -
Publication Release Date: December 4, 2006
W78C32C/W78C032C
Revision A6