lp2985aim5-3.8 National Semiconductor Corporation, lp2985aim5-3.8 Datasheet - Page 16
![no-image](/images/no-image-200.jpg)
lp2985aim5-3.8
Manufacturer Part Number
lp2985aim5-3.8
Description
Micropower 150 Ma Low-noise Ultra Low-dropout Regulator Designed For Use With Very Low Esr Output Capacitors
Manufacturer
National Semiconductor Corporation
Datasheet
1.LP2985AIM5-3.8.pdf
(22 pages)
www.national.com
noted that the pad style which must be used with the 5-pin
package is the NSMD (non-solder mask defined) type.
For best results during assembly, alignment ordinals on the
PC board may be used to facilitate placement of the micro
SMD device.
MICRO SMD LIGHT SENSITIVITY
Exposing the micro SMD device to direct sunlight will cause
misoperation of the device. Light sources such as Halogen
16
lamps can also affect electrical performance if brought near
to the device.
The wavelenghts which have the most detrimental effect are
reds and infra-reds, which means that the fluorescent lighting
used inside most buildings has very little effect on perfor-
mance. A micro SMD test board was brought to within 1 cm
of a fluorescent desk lamp and the effect on the regulated
output voltage was negligible, showing a deviation of less
than 0.1% from nominal.