bu7252sfvm ROHM Co. Ltd., bu7252sfvm Datasheet - Page 13

• Manufacturer Part Number: bu7252sfvm
• Description: Comparators Low Voltage Cmos
• Manufacturer: ROHM Co. Ltd.

● Description of electrical characteristics
1. Absolute maximum ratings
2. Electrical characteristics item
1.1
1.2
1.3
1.4
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10 Response Time （Tre）
2.11 Common-mode rejection ratio （CMRR）
2.12 Power supply rejection ratio （PSRR）
Described here are the terms of electric characteristics used in this technical note. Items and symbols used are also shown.
Note that item name and symbol and their meaning may differ from those on another manufacture’s document or general document.
Absolute maximum rating item indicates the condition which must not be exceeded. Application of voltage in excess of absolute
Maximum rating or use out of absolute maximum rated temperature environment may cause deterioration of characteristics.
Power supply voltage
Differential input voltage （Vid）
Input common-mode voltage range （Vicm）
Power dissipation （Pd）
Input offset voltage （Vio）
Input offset current （Iio）
Input bias current （Ib）
Input common-mode voltage range （Vicm）
Large signal voltage gain （AV）
Circuit current （ICC）
Output sink current （OL）
Output saturation voltage, Low level output voltage （VOL）
Output leakage current, High level output current（I leak）
Indicates the maximum voltage that can be applied between the positive power supply terminal and negative power supply terminal
without deterioration or destruction of characteristics of internal circuit.
Indicates the maximum voltage that can be applied between non-inverting terminal and inverting terminal without deterioration and
destruction of characteristics of IC.
Indicates the maximum voltage that can be applied to non-inverting terminal and inverting terminal without deterioration or destruction of
characteristics. Input common-mode voltage range of the maximum ratings not assure normal operation of IC. When normal
operation of IC is desired, the input common-mode voltage of characteristics item must be followed.
Indicates the power that can be consumed by specified mounted board at the ambient temperature 25℃(normal temperature). As for
package product, Pd is determined by the temperature that can be permitted by IC chip in the package （maximum junction temperature）
and thermal resistance of the package
Indicates the voltage difference between non-inverting terminal and inverting terminal. It can be translated into the input voltage
difference required for setting the output voltage at 0 [V]
Indicates the difference of input bias current between non-inverting terminal and inverting terminal.
Indicates the current that flows into or out of the input terminal. It is defined by the average of input bias current at non-inverting terminal
and input bias current at inverting terminal.
Indicates the input voltage range where IC operates normally.
Indicates the amplifying rate (gain) of output voltage against the voltage difference between non-inverting terminal and inverting
terminal.
It is normally the amplifying rate (gain) with reference to DC voltage.
Av = (Output voltage fluctuation) / (Input offset fluctuation)
Indicates the IC current that flows under specified conditions and no-load steady status.
Indicates the maximum current that can be output under specified output condition (such as output voltage and load condition).
Indicates the voltage range that can be output under specified load conditions.
Indicates the current that flows into IC under specified input and output conditions.
The interval between the application of an input and output condition.
Indicates the ratio of fluctuation of input offset voltage when in-phase input voltage is changed. It is normally the fluctuation of DC.
CMRR ＝（Change of Input common-mode voltage）/（Input offset fluctuation）
Indicates the ratio of fluctuation of input offset voltage when supply voltage is changed. It is normally the fluctuation of DC.
PSRR＝（Change of power supply voltage）/（Input offset fluctuation）
（VDD/VSS）
13/16