w83697 Winbond Electronics Corp America, w83697 Datasheet - Page 92

• Manufacturer Part Number: w83697
• Description: Winbond I/o
• Manufacturer: Winbond Electronics Corp America

9. HARDWARE MONITOR
9.1
The W83697HF can be used to monitor several critical hardware parameters of the system, including
power supply voltages, fan speeds, and temperatures, which are very important for a high-end computer
system to work stable and properly. W83697HF provides LPC interface to access hardware .
An 8-bit analog-to-digital converter (ADC) was built inside W83697HF.
simultaneously monitor 7 analog voltage inputs, 2 fan tachometer inputs, 2 remote temperature, one
case-open detection signal. The remote temperature sensing can be performed by thermistors, or
2N3904 NPN-type transistors, or directly from Intel
W83697HF provides: 2 PWM (pulse width modulation) outputs for the fan speed control; beep tone
output for warning; SMI#(through serial IRQ) , OVT#, GPO# signals for system protection events.
Through the application software or BIOS, the users can read all the monitored parameters of system
from time to time. And a pop-up warning can be also activated when the monitored item was out of the
proper/preset range. The application software could be Winbond's Hardware Doctor
(LanDesk Client Management), or other management application software. Also the users can set up
the upper and lower limits (alarm thresholds) of these monitored parameters and to activate one
programmable and maskable interrupts. An optional beep tone could be used as warning signal when
the monitored parameters is out of the preset range.
9.2
The W83697HF provides two interface for microprocessor to read/write hardware monitor internal
registers.
9.2.1
The first interface uses LPC Bus to access which the ports of low byte (bit2~bit0) are defined in the port
5h and 6h. The other higher bits of these ports is set by W83697HF itself. The general decoded
address is set to port 295h and port 296h. These two ports are described as following:
Port 295h: Index port.
Port 296h: Data port.
The register structure is showed as the Figure 9.1
General Description
Access Interface
LPC interface
- 83 -
TM
Deschutes CPU thermal diode output. Also the
Publication Release Date: Feb. 2002
W83697HF/F
The W83697HF can
TM
, or Intel
Revision 0.70
TM
LDCM