w83627hg Winbond Electronics Corp America, w83627hg Datasheet - Page 60

• Manufacturer Part Number: w83627hg
• Description: Winbond Lpc I/o
• Manufacturer: Winbond Electronics Corp America

Winbond Test Register - Index 50h ~ 55h °Bank 0±
These registers are reserved for Winbond internal use.
BEEP Control Register 1 - Index 56h °Bank 0±
Register Locationš
Power on Default Valueš
Attributeš
Sizeš
Bit 7š Enable BEEP Output from FAN 2 if the monitor value exceed the limit value. Write 1, enable
Bit 6š Enable BEEP Output from FAN 1 if the monitor value exceed the limit value. Write 1, enable
Bit 5š Enable BEEP Output from Temperature Sensor 2 if the monitor value exceed the limit value.
Bit 4š Enable BEEP output for Temperature Sensor 1 if the monitor value exceed the limit value.
Bit 3š Enable BEEP output from VDD °+5V±, Write 1, enable BEEP output if the monitor value ex-
Bit 2š Enable BEEP output from +3.3V. Write 1, enable BEEP output, which is default value.
Bit 1š Enable BEEP output from VCOREB. Write 1, enable BEEP output, which is default value.
Bit 0š Enable BEEP Output from VCOREA if the monitor value exceed the limits value. Write 1, en-
BEEP output, which is default value.
BEEP output, which is default value.
Write 1, enable BEEP output. Default 0
Write 1, enable BEEP output. Default 0
ceed the limits value. Default is 0, which is disable BEEP output.
able BEEP output, which is default value
7
56h
00h
Read/Write
8 bits
6
5
4
3
2
- 56 -
1
0
EN_VCA_BP
EN_VCB_BP
EN_V33_BP
EN_V5_BP
EN_T1_BP
EN_T2_BP
EN_FAN1_BP
EN_FAN2_BP
W83627HF/ F/ HG/ G