v23826-c18-t364 Infineon Technologies Corporation, v23826-c18-t364 Datasheet - Page 3

• Manufacturer Part Number: v23826-c18-t364
• Description: Dc/dc V/3.3 Single Mode Atm/sdh/sonet Long Haul Transceiver With Connector
• Manufacturer: Infineon Technologies Corporation

Description
The Infineon single mode ATM transceiver complies with the ATM Forum's Network
Compatible ATM for Local Network Applications document and ANSI's Broadband
ISDN - Customer Installation Interfaces, Physical Media Dependent Specification,
T1.646-1995, Bellcore-SONET OC-3/LR-1 and ITU-T G.957 STM-1/L.1.1.
ATM was developed to facilitate solutions in multimedia applications and real time
transmission. The data rate is scalable, and the ATM protocol is the basis of the
broadband public networks being standardized in the International Telecommunications
Union (ITU), the former International Telegraph and Telephone Consultative Committee
(CCITT). ATM can also be used in local private applications.
The Infineon single mode ATM long haul transceiver is a single unit comprised of a
transmitter, a receiver, and an ST receptacle. This design frees the customer from many
alignment and PC board layout concerns. The module is designed for low cost WAN
applications. It can be used as the network end device interface in workstations, servers,
and storage devices, and in a broad range of network devices such as bridges, routers,
intelligent hubs, and wide area ATM switches.
This transceiver operates at 155.520 Mbit/s from a single power supply (+5 V or +3.3 V).
The differential data inputs and outputs are PECL compatible.
Functional Description
This transceiver is designed to transmit serial data via single mode cable.
Figure 2
Data Sheet
Functional Diagram
TD
TD
RD
RD
SD
Monitor
Receiver
Laser
Driver
Power
Control
Signal Monitor and
Automatic Shut-Down
LEN
ISM
RX Coupling Unit
Laser Coupling Unit
3
e/o
Laser
o/e
o/e
Single Mode Fiber
V23826-C18-T364
V23826-C18-T64
Description
2000-03-01