v23826-k305-c13 Infineon Technologies Corporation, v23826-k305-c13 Datasheet - Page 3

• Manufacturer Part Number: v23826-k305-c13
• Description: Multimode 1.0625 Gbit/s Fibre Channel Gigabit Ethernet Transceiver
• Manufacturer: Infineon Technologies Corporation

Description
The Infineon multimode transceiver is based on the Physical Medium Depend (PMD)
sublayer and baseband medium, type 1000-Base-SX (Short Wavelength Laser)
(IEEE 802.3z) and complies with the Fibre Channel Physical and Signaling Interface
(FC-PH), ANSI XSI TT Fibre Channel Physical Standard Class 100-M5-SLI, latest
revision.
The appropriate fiber optic cable is 62.5 µm or 50 µm multimode fiber with Duplex SC
connector.
The Infineon multimode transceiver is a single unit comprised of a transmitter, a receiver,
and an SC receptacle. This design frees the customer from many alignment and PC
board layout concerns.
The module is designed for low cost LAN, WAN, Gigabit Ethernet, and Fibre Channel
applications. It can be used as the network end device interface in mainframes,
workstations, servers, and storage devices, and in a broad range of network devices
such as bridges, routers, intelligent hubs, and local and wide area switches.
This transceiver operates at 1.0625 Gbit/s and 1.3 Gbit/s from a single power supply
(5 V or 3.3 V). The full differential data inputs and outputs are PECL compatible.
Link Length as Defined by IEEE and Fibre Channel Standards
Fiber Type
at 1.0625 Gbit/s
50 µm, 2000 MHz*km
50 µm, 500 MHz*km
50 µm, 400 MHz*km
62.5 µm, 200 MHz*km
62.5 µm, 160 MHz*km
at 1.3 Gbit/s
50 µm, 500 MHz*km
50 µm, 400 MHz*km
62.5 µm, 200 MHz*km
62.5 µm, 160 MHz*km
1)
2)
Data Sheet
Minimum reach as defined by IEEE and Fibre Channel Standards. A 0 m link length (loop-back connector) is
supported.
Maximum reach as defined by IEEE and Fibre Channel Standards. Longer reach possible depending upon link
implementation.
3
min.
2
2
2
2
2
2
2
2
2
V23826-K305-Cxx/Cxxx
1)
Reach
max.
860
500
450
300
250
550
500
275
220
2)
Description
2004-01-27
Unit
meters
meters