w83l786nr Winbond Electronics Corp America, w83l786nr Datasheet - Page 33

• Manufacturer Part Number: w83l786nr
• Description: W83l786nr W83l786ng Winbond H/w Monitoring Ic
• Manufacturer: Winbond Electronics Corp America

8.19 INT# Property Select - Index 52h
Power on - <7:0> --0000, 0100 b
8.20 Thermal Sensor 1/2 Type Register - Index 53h
Power on default [7:0] = 0100, 0001 b
BIT
BIT
7-4
3-2
7-2
1
0
1
0
Reserved
T1_TYPE
T0_TYPE
TEMP_INT_MD [1:0]
NAME
Reserved
Reserved
EN_INT#
NAME
READ/WRITE
Read/Write
Read/Write
Read/Write
READ/WRITE
Read/Write
Read/Write
Read/Write
Read/Write
Reserved.
Temperature sensor 1 type.
<0> - Thermistor (10K @ 25 degree C, B=3435).
<1> - thermal diode.
Temperature sensor 0 (GPU) type.
<0> - Thermistor (10K @ 25 degree C, B=3435)
<1> - thermal diode.
- 28 -
Reserved.
Reserved.
Temperature INT Mode Select.
<00> - Comparator Interrupt Mode:
temperature) limit causes an interrupt. Reading the
Interrupt Status will reset this interrupt.
<01> - Two Time Interrupt Mode:(Default)
interrupt mode with hysteresis and T
Temperature exceeding T
and then temperature going below T
cause another interrupt if the previous interrupt
has been reset by reading the interrupt Status
Register. Once an interrupt event has occurred by
exceeding T
remains above the T
<10> - One Time Interrupt Mode:
interrupt mode with hysteresis type. Temperature
exceeding T
interrupt and then temperature going below T
(Hysteresis temperature) will not cause an
interrupt. Once an interrupt event has occurred by
exceeding T
interrupt will not occur again until the temperature
exceeding T
Enable INT# Output. A one enables the INT#
Interrupt output.
W83L786NR/ W83L786NG
Temperature
This bit use in temperature sensor 1/2
This bit use in temperature sensor 1/2
O
O
.
O
O
, then reset, if the temperature
, then going below T
DESCRIPTION
(Over-temperature) causes an
DESCRIPTION
HYST
1/2
.
O
exceeds
, causes an interrupt
HYST
T
O
HYST
will also
O
(Over-
, and
type.
HYST