cp2200 Silicon Laboratories, cp2200 Datasheet - Page 31

• Manufacturer Part Number: cp2200
• Description: Single-chip Ethernet Controller
• Manufacturer: Silicon Laboratories

Note: Reading this register will clear all INT0 interrupt flags.
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
EOPINT
Bit7
RC
EOPINT: End of Packet Interrupt Flag
0: The last byte of a packet has not been read since the last time EOPINT was cleared.
1: The last byte of a packet has been read.
RXEINT: Receive FIFO Empty Interrupt Flag
0: The receive FIFO has not been empty since the last time RXEINT was cleared.
1: The receive FIFO is empty.
SELFINT: Self Initialization Complete Interrupt Flag
0: Self Initialization has not completed since the last time SELFINT was cleared.
1: Self Initialization has completed.
OSCINT: Oscillator Initialization Complete Interrupt Flag
0: Oscillator Initialization has not completed since the last time OSCINT was cleared.
1: Oscillator Initialization has completed.
FLWEINT: Flash Write/Erase Operation Complete Interrupt Flag
0: A Flash write or erase operation has not completed since the last time FLWEINT was cleared.
1: A Flash write or erase operation has completed.
TXINT: Packet Transmitted Interrupt Flag
0: A packet transmission has not completed since the last time TXINT was cleared.
1: A packet has been transmitted.
RXFINT: Receive FIFO Full Interrupt Flag
0: The receive FIFO has not been full since the last time RXFINT was cleared.
1: The receive FIFO is full.
RXINT: Packet Received Interrupt Flag
0: A packet has not been added to the receive buffer since the last time RXINT was cleared.
1: A packet has been added to the receive buffer.
RXEINT
Bit6
RC
Register 5. INT0: Interrupt Status Register 0 (Self-Clearing)
SELFINT
Bit5
RC
OSCINT FLWEINT
Bit4
RC
Bit3
RC
Rev. 1.0
TXINT
Bit2
RC
RXFINT
Bit1
RC
RXINT
Bit0
RC
CP2200/1
00000000
Reset Value
Address:
0x63
31