mk712 Integrated Device Technology, mk712 Datasheet - Page 9

• Manufacturer Part Number: mk712
• Description: Touch Screen Controller
• Manufacturer: Integrated Device Technology

Analog to Digital Converter Option
IDT™ / ICS™ TOUCH SCREEN CONTROLLER
MK712
TOUCH SCREEN CONTROLLER
The 12-bit ADC converts X and Y co-ordinates at a rate determined by registers 6 and 7. The converter uses a
ratiometric technique to give absolute co-ordinates on the screen, largely independent of variations in screen
resistance, temperature or power supply voltage. The total voltage applied across the screen is defined as full-scale
for the converter (i.e. 4095) and any point touched on the screen is proportional to this. For example, if the screen
is touched exactly in the center, the converter will read 2047. This feature may allow for the elimination of calibration
upon startup.
However, the full scale voltage is defined at the IC pins and so any parasitic interconnect resistance will be included
in full scale. In addition, the interconnect resistances on the screen also account for about 20% of the total
resistance. This means that approximately the bottom 10% and top 10% of full scale are inaccessible.
The converter is guaranteed to be monotonic, with no missing codes.
9
TOUCH SCREEN CONTROL
MK712
REV L 070805