ps5r-sb IDEC Corporation, ps5r-sb Datasheet - Page 10

• Manufacturer Part Number: ps5r-sb
• Description: Ps5r-s Switching Power Supplies
• Manufacturer: IDEC Corporation

PS5R-S Switching Power Supplies
Parts Description
• PS5R-SB
10
• Do not use switching power supplies with electric equipment
• Make sure that the input voltage and output current do not ex-
• Do not touch the terminals of the switching power supply while
• Provide the final product with protection against malfunction or
• Operating temperatures should not exceed the ratings. Be sure
• DC ON and DC Low Indicators
When the output voltage drops below approx. 80% of the rated value, the DC Low
LED goes on.
The status can be seen by the DC ON and DC Low indicators.
∗ The LEDs go on when the input voltage drops below 57V AC at full load.
whose malfunction or inadvertent operation may damage the
human body or life directly.
ceed the ratings. If the input voltage and output current exceed
the ratings, electric shock, fire, or malfunction may occur.
input voltage is applied, otherwise electric shock may occur.
damage that may be caused by malfunction of the switching
power supply.
to note the derating characteristics. If the operating temperature
exceeds the ratings, electric shock, fire, or malfunction may oc-
cur.
Marking
VR.ADJ
DC Low
DC ON
DC Low LED
DC ON LED
Safety Precautions
LOW
ON
VR.
ADJ
INPUT
100-240VAC
OUTPUT
+V
–V
(Amber)
(Green)
N
L
Status
Output Voltage
Adjustment
Operation Indicator
(Green)
Output Low Indicator
(Amber)
DC Output Terminals
Ground Terminal
Input Terminal
Name
Normal
OFF
ON
Input Voltage Low∗ ∗ ∗ ∗
• Allows adjustment within ±10%.
• Lights when the output voltage is on.
• Lights when the output voltage drops below approx.
• +V: Positive output terminal
• –V: Negative output terminal
• Be sure to connect this terminal to a proper ground.
• Accepts a wide range of voltage and frequency. Polar-
Turning clockwise increases the output voltage.
80% of the rated value (PS5R-SB/SF/SG only).
ity does not matter when using DC input.
Overload or
ON
ON
• PS5R-SC/SD/SE
INPUT 50/60Hz
VR.
ADJ
OUTPUT
DC ON
-V
L
N
+V
Description
Short-circuit
Output
OFF
ON
• Blown fuses indicate that the internal circuits are damaged.
• Do not use the switching power supplies to charge recharge-
• Do not overload or short-circuit the switching power supply for
• Do not disassemble, repair, or modify the power supplies, oth-
• The fuse inside the PS5R-S switching power supply is for AC in-
Contact IDEC for repair. Do not just replace the fuse and reop-
erate, otherwise electric shock, fire, or malfunction may occur.
able batteries.
a long period of time, otherwise the internal elements may be
damaged.
erwise the high voltage internal part may cause electric shock,
fire, or malfunction.
put. Use DC fuse for DC input.
Output OFF
OFF
OFF
• PS5R-SF/SG
-V
+V
(07/09/13)