p-2.5dbqs-cr1-d1 DDK Ltd., p-2.5dbqs-cr1-d1 Datasheet - Page 9

• Manufacturer Part Number: p-2.5dbqs-cr1-d1
• Description: Sma Style Coaxial Connector
• Manufacturer: DDK Ltd.

○ Assembly Insutruction（2）
1
2
3
4
5
Insulator with aluminum foil tape
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
Parts Configulation
Outer Conductor
Sheath
Cable
DM Series
L
No gap
（5.4）
2
Crimping Dies
A-R
Ferule
Cut the aluminum foil tape
（9.5）
8
Ferule
0.3
1
Soldering
0.5 max.
（between body and ferule）
L
Insulator
1
Spread the top
2.6
1.5
Pre-soldering
0.3
0.3
Center Conductor
Contact
Contact
9
（Note）Aluminum foil tape can be cut in 5.4mm.
（Note）Please be careful to not damage the center
（Note）Please be careful to not deform the
（Note）When the solder is stick out, please shave
（Note）Please be careful to not deform the
1. The cable length require for cable assembly.
2-1．Cut the end of cable as fig.2.
2-2．Pre-solder up the center conductor of the
3-1．Pick the outer conductor of the cable and
3-2．Cut the aluminum foil tape at the foot of
3-3．Put back and spread the outer conductor
4-1．Solder the center conductor and contact.
5-1．Insert above cable into the connector body.
1-1．Insert the cable into the ferule.
L ＝ L
（Note）Please confirm the direction of ferule
cable.
turn down to the sheath.
outer conductor turn down.
Cover the naked outer conductor with
the ferule and crimp the ferule.
Crimp Dies : A-R1
as fig.3.
Body
1
the extra solder.
conductor and outer conductor of cable.
insulator by heat.
insulator.
-7.7 ＝ L
2
+11.6
Unit：mm