mcs7705 MosChip, mcs7705 Datasheet - Page 13

• Manufacturer Part Number: mcs7705
• Description: Usb 1.1 To Single Printer Port
• Manufacturer: MosChip

Rev. 1.7
Device Control Register
Register:
Description:
Offset:
Permissions:
Access Condition:
Bit
0
1
2
3
4
5
6
7
Unused
Bit[7]
nSTROBE
nAUTOFD
nSLCTIN
Unused
Unused
Unused
Name
INIT
DIR
DCR
Device Control Register
002
Read/Write
Application Number = 0x0100
Unused
Bit[6]
Logic 0 = Sets the nSTROBE pin to high.
Logic 1 = Sets the nSTROBE pin to low. PD7-PD0 data are latched into
Logic 0 = Sets the nAUTOFD pin to high. Printer generates auto line feed
Logic 1 = Sets the nAUTOFD pin to low. No auto feed function.
Logic 0 = Sets the INIT pin to high.
Logic 1 = Sets the INIT pin to low. Peripheral/printer starts its initialization
Logic 0 = Sets the nSLCTIN pin to high. Selects the printer.
Logic 1 = Sets the nSLCTIN pin to low. Printer is not selected.
Not uset set to 0
Logic 0 = PD7-PD0 pins are configured for output mode.
Logic 1 = PD7-PD0 pins are configured for input mode.
Not used, set to 0.
Not used, set to 0.
Bit[5]
DIR
printer
after each line is printed.
routine.
Unused
Bit[4]
nSLCTIN
Bit[3]
Description
USB 1.1 to Single Printer Port
Bit[2]
INIT
MCS7705
nAUTOFD nSTROBE
Bit[1]
Bit[0]
Page 13