irm-3638c Everlight Electronics Co., Ltd., irm-3638c Datasheet - Page 4

• Manufacturer Part Number: irm-3638c
• Description: Infrared Receiver Control Receiver Module ‧ ‧ ‧ ‧
• Manufacturer: Everlight Electronics Co., Ltd.

Infrared Receiver Control
Receiver Module
Test method
The specified electro-optical characteristics are valid under the following conditions.
1. Measurement environment
2. External light
3. Standard transmitter
4. The measurement system is shown in Fig.-3
Everlight Electronics Co., Ltd.
Document No: DMO-0000211 Rev. 3
A place without extreme light reflections.
The environment contains an ordinary, white fluorescent lamp without high frequency modulation. The
color temperature is 2856K and the illumination at the IR receiver is less than 10 Lux (Ev 10Lux)
The test transmitter is calibrated by using the circuit shown in figure 2. The radiation intensity of the
transmitter is adjusted until Vo=400mVp-p. Both, the test transmitter and the photo diode, have a peak
wavelength of 940nm. The photo diode for calibration is PD438B (λp=940nm, Vr=5V).
Fig.-1 Transmitter Wave Form
Fig.-2 standard transmitter calibration
4
IRM-36xxC series
Fig.-3
D.U.T output Pulse
Measuring System
http://www.everlight.com
November 1 ,2011
≦
.