S25FL008A Meet Spansion Inc., S25FL008A Datasheet - Page 25

• Manufacturer Part Number: S25FL008A
• Description: 8-megabit Cmos 3.0 Volt Flash Memory With 50 Mhz Spi Bus Interface
• Manufacturer: Meet Spansion Inc.

12. Absolute Maximum Ratings
13. Operating Ranges
14. DC Characteristics
June 29, 2007 S25FL008A_00_B2
Do not stress the device beyond the ratings listed in this section, or serious, permanent damage to the device
may result. These are stress ratings only and device operation at these or any other conditions beyond those
indicated in this section and in the
operation for extended periods at the limits listed in this section may affect device reliability.
Notes
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs or I/O pins may overshoot V
2. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
3. Stresses above those listed under
Note
Operating ranges define those limits between which functionality of the device is guaranteed.
This section summarizes the DC Characteristics of the device. Designers should check that the operating
conditions in their circuit match the measurement conditions specified in the Test Specifications in
on page
Ambient Storage Temperature
Voltage with Respect to Ground: All Inputs and I/Os
Ambient Operating Temperature (T
Positive Power Supply
of up to 20 ns. See
V
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
CC
+ 2.0 V for periods up to 20 ns. See
26, when relying on the quoted parameters.
Figure
Description
12.1. Maximum DC voltage on output and I/O pins is 3.6 V. During voltage transitions outputs may overshoot to
D a t a
+0.8 V
–0.5 V
+0.5 V
–2.0 V
+2.0 V
V
2.0 V
V
Figure 12.1 Maximum Negative Overshoot Waveform
Figure 12.2 Maximum Positive Overshoot Waveform
A
CC
CC
)
Absolute Maximum Ratings
Description
Operating Ranges
Figure
Table 12.1 Absolute Maximum Ratings
S h e e t
Table 13.1 Operating Ranges
S25FL008A
12.2.
20 ns
20 ns
Industrial
Voltage Range
may cause permanent damage to the device. This is a stress rating only;
section of this document is not implied. Device
20 ns
20 ns
20 ns
20 ns
–0.5 V to V
–65°C to +150°C
Rating
CC
–40°C to +85°C
+0.5 V
2.7 V to 3.6 V
Rating
SS
to –2.0 V for periods
Table 15.1
25