sbl-8-h-600-ir-sl-3549 Pepperl+Fuchs, sbl-8-h-600-ir-sl-3549 Datasheet - Page 3

• Manufacturer Part Number: sbl-8-h-600-ir-sl-3549
• Description: Background Suppression Sensor
• Manufacturer: Pepperl+Fuchs

Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
Curves/Diagrams
Options:
Sensors with the version -V are equipped with a solenoid valve and can directly control a 3/2 way pneumatic actuator, without
any-interaction of an external system controlling unit (PLC). As soon as conveyed goods are detected, the diffuse mode sensor
gives an electrical-signal to the pneumatic solenoid valve, which is then activated.
Sensors with the control logic option -SL-(V) allows up to 50 diffuse mode sensors to be connected-to each other (data and pow-
er), depending on the current consumption of sensor and solenoid valve. An additional supply power and data bus cable is used
to interconnect the sensors with control logic option -SL. All necessary functions for controlling the material flow of conveyed
goods are supported, such as: single feed, single release, slug release, external motor and solenoid valve control. It is also pos-
sible to energize the valves of all sensors included in the cascade by slug release (VT). To do this, apply the positive supply volt-
age (+UB) on the input VT of the first sensor.
Sensors with timing function -Z features the adjustment of the ON- and OFF delay of the output independently. This optimizes
control of the solenoid valve. A zero pressure accumulation of the conveyed goods can be realized with application of time ON-
and OFF delay of the output. The ON- and OFF delay to control the switching of the solenoid valve may be adjusted between
0 and 2 seconds.
Additional power supply between every 20 to 25 sensors can be realized by the use of the power in feed junction V1S-TEE-V1/
V1S in combination with a cable V1-G-...-PVC. This features to practically connect any number of SBL sensors in series. Attention
should be paid to the maximum rated current of the cable and the connectors which usually is max. I = 4 A. For more details on
the maximum rated current of single components, please refer to our datasheet values. For the electrical supply of the sensors
the country specific standards have to be considered.
Note:
Use a screwdriver to adjust the sensing range. We strongly recommend to use the screwdriver given in the accessories section.
Background suppression sensor
Detection range
Difference in detection distance
Measured detection distance X [mm]
800
600
400
200
0
0
X
[e-mail]
USA: [phone]
100
Sensor range 15 ... 600 mm, adjustable
200
7°
300
white 90 %
grey 18 %
black 6 %
Germany: [phone]
[e-mail]
Adjustment range
Adjusted detection distance X [mm]
400
500
[e-mail]
600
Singapore: [phone]
Copyright Pepperl+Fuchs
SBL-8-H-600-IR-SL-3549
3