sbl-8-h-900-sl-v-z-4871 Pepperl+Fuchs, sbl-8-h-900-sl-v-z-4871 Datasheet - Page 4

• Manufacturer Part Number: sbl-8-h-900-sl-v-z-4871
• Description: Background Suppression Sensor
• Manufacturer: Pepperl+Fuchs

4
Position the object to be detected in the path of the beam. If the object is detected, the yellow LED lights up.
If it does not light up, the detection range must be further adjusted on the potentiometer until it lights up when an object is de-
tected.
Version SBL-8-H-SL-V-Z only:
The two adjusting mechanisms on the front side of the sensor can be used separately for timer functions for the switching on
or switching off process.
This results in a delay defined by the adjuster between the change of state (object detected -> object not detected or vice-versa)
and the switching process. The duration of the delay can be set for up to 2 seconds.
Cleaning:
We recommend cleaning the optical surface and checking all connections at regular intervals.
Note:
Use a screwdriver to adjust the sensing range. We strongly recommend to use the screwdriver given in the accessories section.
Background suppression sensor
Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
[e-mail]
USA: [phone]
Germany: [phone]
[e-mail]
[e-mail]
Singapore: [phone]
Copyright Pepperl+Fuchs
SBL-8-H-900-SL-V-Z-4871