df40c-10ds-0.4v Hirose Electric, df40c-10ds-0.4v Datasheet - Page 10

• Manufacturer Part Number: df40c-10ds-0.4v
• Description: 0.4 Mm Contact Pitch 1.5 Mm Above The Board Board-to-board /board-to-fpc Connectors
• Manufacturer: Hirose Electric

A262
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
DF40 Series●0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
BHandling Precautions when un-mating the connectors
Header
Header
Receptacle
Receptacle
FPC
Low rigidity FPC should not be used for mounting of the
receptacle.
Un-mating of the connectors when the receptacle is mounted
on the extremely flexible FPC can result in solder joint failure
or damage to the connector itself.
It is highly recommended that the receptacle be mounted on
the rigid PCB and the header on the FPC.
Contact HRS when specific application requires mounting of
the receptacle on the FPC.
All published performance data is based on connectors
mounted on rigid FPC and PCB.
Failure to exercise caution when un-mating connectors
mounted on the non-rigid FPC may also result in connector
breakage.