b10-03 ZETTLER Electronics Inc., b10-03 Datasheet - Page 2

• Manufacturer Part Number: b10-03
• Description: B10 Rf Relays
• Manufacturer: ZETTLER Electronics Inc.

NOTES:
1
2
3
4
B10 RF Relays
All parameters specified per EIA/NARM standards
Unless otherwise noted, all parameters are specified
Life expectancies based on characteristic life
Frequency at which the difference between output
wired using 50 coaxial cable.)
for dry reed relays, # RS-421 and RS-436, if a
suitable parametric standard exists.
at 25°C and 40% RH.
(63.2% failure) calculated from the 2-parameter
and input signal amplitude exceeds -3dB. (Direct
Weibull distribution. Contact resistance >2.0
defines end of life.
For Most Recent Data, Consult the Coto Technology Website:
ENVIRONMENTAL RATINGS:
Storage Temperature: -35°C to + 100°C.
Operating Temperature: -20°C to + 85°C.
Vibration: sinusoidal vibration with an amplitude of
10G over a 10Hz to 2000Hz frequency range shall
not cause a closed channel activated at the nominal
coil voltage to open, not an open channel to close.
Max Soldering Temperature: 438°F(226°C) max for
1 minute dwell time. Temperature measured at a
relay ball termination.
Moisture sensitive component. Handle as
J-STD-020B level 5a.
www.cotorelay.com
6
E-mail: [e-mail]
47