upd6p9 Renesas Electronics Corporation., upd6p9 Datasheet - Page 37

• Manufacturer Part Number: upd6p9
• Description: 4-bit Single-chip Microcontroller For Infrared Remote Control Transmission
• Manufacturer: Renesas Electronics Corporation.

10. RECOMMENDED SOLDERING CONDITIONS
representative.
Infrated reflow
VPS
Wave soldering
Partial heating
Infrated reflow
Wave soldering
Partial heating
Soldering Method
Soldering Method
Remark Products that have the part numbers suffixed by “-A” are lead-free products.
The µ PD6P9 must be soldered and mounted under the following recommended conditions.
For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales
For technical information, see the following website.
Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)
(1) µ PD6P9M1MC-5A4: 20-pin plastic SSOP (7.62 mm (300))
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
(2) µ PD6P9M1MC-5A4-A: 20-pin plastic SSOP (7.62 mm (300))
Note After opening the dry pack, store it at 25°C or less and 65% RH or less for the allowable storage period.
Caution Do not use different soldering methods together (except for partial heating).
µ PD6P9M3MC-5A4: 20-pin plastic SSOP (7.62 mm (300))
µ PD6P9M3MC-5A4-A: 20-pin plastic SSOP (7.62 mm (300))
Package peak temperature: 235°C, Time: 30 seconds max. (at 210°C
or higher), Count: Two times or less, Exposure limit: 3 days
(after that, prebake at 125°C for 10 hours)
Package peak temperature: 215°C, Time: 40 seconds max. (at 200°C
or higher), Count: Two times or less, Exposure limit: 3 days
(after that, prebake at 125°C for 10 hours)
Solder bath temperature: 260°C max, Time: 10 seconds max., Count: once,
preheating temperature: 120°C max. (package surface temperature)
Exposure limit: 3 days
Pin temperature: 350°C max., Time: 3 seconds max. (per pin row)
Package peak temperature: 260°C, Time: 60 seconds max. (at 220°C
or higher), Count: Three times or less, Exposure limit: 3 days
(after that, prebake at 125°C for 10 to 72 hours)
For details, contact an NEC Electronics sales representative.
Pin temperature: 350°C max., Time: 3 seconds max. (per pin row)
Table 10-1. Surface Mounting Soldering Conditions
Note
Data Sheet U15144EJ1V1DS
(after that, prebake at 125°C for 10 hours)
Soldering Conditions
Soldering Conditions
Note
Note
Note
IR35-103-2
VP15-103-2
WS60-103-1
IR60-103-3
Condition Symbol
Condition Symbol
Recommended
Recommended
–
µ PD6P9
–
–
37