fdt1-028k Measurement Specialties, fdt1-028k Datasheet - Page 2

• Manufacturer Part Number: fdt1-028k
• Description: Fdt Series Elements With Lead Attachment
• Manufacturer: Measurement Specialties

FDT Series Rev 1
The connector pins on the FDT sensors can be directly soldered to a PCB with a reasonable level of care.
This component cannot withstand high temperatures (>80°C) and therefore soldering of the pins to a PCB
must be done quickly. A heat sink clamped to the interface area between the film and the crimps will take
the heat away from the film. Pre-tin the pins and then quickly solder them to the board. Do not allow the
soldering iron to touch the film and do not use a dwell time of over 5 seconds on the pins. Low temperature
solder can also be used.
FDT Series Elements
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not
convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice
to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation
consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by
customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
FDT1-028K
FDT1-052K
FLDT1-028K
FLDT1-052K
FLDT1-028K
w/adh-F
Model Number Part Number
North America
Measurement Specialties, Inc.
1000 Lucas Way
Hampton, VA 23666
Sales and Customer Service
Tel: [phone] or
[phone]
Fax: [phone]
Technical Support
Email: [e-mail]
1-1002785-1
2-1002785-1
1-1002786-1
2-1002786-1
1001777
Europe
MEAS Deutschland GmbH
Hauert 13
44227 Dortmund
Germany
Sales and Customer Service
Tel: [phone]
Technical Support
Tel: [phone]
Email: [e-mail]
52 μm
28 μm
52 μm
28 μm
thickness
28 μm
Film
ordering information
with Lead Attachment
www.meas-spec.com
dimensions
2 of 2
Film
.620
.620
.620
.620
.650
(16)
(16)
(16)
(16)
(17)
A
Electrode
.485 (12)
.485 (12)
.485 (12)
.485 (12)
.485 (12)
B
DIMENSION in INCHES (mm)
Asia
Measurement Specialties (China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District
Shenzhen, China 518107Sales and Customer
Service
Tel: [phone]
Technical Support
Email: [e-mail]
[235]
[235]
[235]
[235]
[140]
Film
9.25
9.25
9.25
9.25
5.51
C
Electrode
1.16 (30)
1.16 (30)
1.16 (30)
1.16 (30)
1.18 (30)
D
(μm)
205
230
125
55
85
t
05/12/2009
Cap
(nF)
1.37
.740
1.37
.740
1.37