rfp-150n50te Anaren Microwave, rfp-150n50te Datasheet - Page 2

• Manufacturer Part Number: rfp-150n50te
• Description: Aluminum Nitride Terminations 150 Watts, 50 ?
• Manufacturer: Anaren Microwave

2
Typical Performance
Power Derating
Model RFP-150N50TE
Sales Desk Europe: Voice: ([phone] Fax: [phone]
Sales Desk USA: Voice: [phone] Fax: [phone]
Suggested Mounting Procedures
1. Make sure that the devices are mounted on flat surfaces
2. Drill & tap the heatsink for the appropriate thread size to be
3. Coat heatsink with a minimum amount of high quality
4. Position device on mounting surface & secure using socket
5. Solder leads in place using an SN63 type solder with a
(.001" under the device) to optimize the heat transfer.
used.
silicone grease (.001" max. thickness).
head screws, flat & split washers. Torque screws to the
appropriate value. Make sure that the device is flat against
the heatsink. (Care should be taken to avoid upward
pressure of the leads towards the lid).
controlled temperature iron (700°F).
.025
(2 PLACES)
SUGGESTED STRESS RELIEF METHODS
BOARD LOWER
THAN LEAD.
MIN.
SCALE:
BOARD EVEN
WITH LEAD.
BOARD LOWER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE:
BOARD HIGHER
THAN LEAD.