SG243200CNCWA-T1 DATA IMAGE, SG243200CNCWA-T1 Datasheet - Page 15

• Manufacturer Part Number: SG243200CNCWA-T1
• Description: LCD_Module
• Manufacturer: DATA IMAGE

Confidential Document
11. TOUCH PANEL CHARACTERISTICS
1.Scope
2. Features
3. General Specification
Item
ITO Glass
FPC (ITO Film)
Connector
Total Thickness
4. RATING
5. Electrical Specification
6. Mechanical Specification
7. Durability
This specification is applied to DATA IMAGE Display Devices Product/ SG243200
4.1 The maximum voltage: DC 7Volts
4.2 Usable Temperature Range From: –20°C to 60 °C(20~90%)
4.3 Storage Temperature Range From: –40°C to 80 °C(20~90%)
5.1 Resistance between leads: FILM(X axis) GLASS (Y axis):200~900Ω
5.2 Linearity : X axis ±1.5%↓,Y axis ±1.5%↓
5.3 Insulation resistance: 20MΩ↑ @DC 25V
5.4 Chattering Time : 10msec @100KΩ↓ Pull -UP
6.1 Input Method pen or Finger
6.2 Operating Force: 80g↓ With R8.0 HS40° Silicon Rubber
6.3 Surface Hardness: 2H (Pencil Test) ,Hard Coated PET
6.4 Light Transmission: 75%↑ (Non Glare Type),80%↑ (Clear Type)
7.1 Durability against Writing Characters
7.2 Punching Life
Input Mode : Pen or Finger
Structure: PET-------------Non Glare ITO Film, 175µm
Type : Analog Resistive Type Touch Panel
Connector : FPC
• Resistance Between Leads : FILM (X axis) GLASS (Y axis)
• Linearity : X axis ±1.0%↓, Y axis ±1.0%↓
• Insulation Resistance: 20 M Ω↑ @DC 25V
After writing 200,000 characters in the same area (20mm*20mm),
Force : 250g , Speed: 1,000 characters/hour
After Punching 1,200,000 Times with the R8.0 silicon rubber
Force : 250g, Speed:2/sec
Glass------------ITO Glass, 0.7mm/1.1mm/1.8mm
Tape Gasket----60µm
Dot pitch-------1.0 mm(Optional)
• Resistance Between Leads : FILM (X axis) GLASS (Y axis)
• Linearity : X axis ±1.0%↓, Y axis ±1.0%↓
80g↓ With R0.8 Polyacetal pen
(@550nm, Spectro Photometer Hitachi U3300)
Clear ITO Film, 175µm
Specification
1.1±0.1(T)
175±15(ITO Film)
FPC,4-pin connector (L23.3*W5.5),Pitch=1.0
87.3±0.3(W)*69.3±0.3(H)*0.95±0.15(T)
Unit
mm
µm
mm
mm
Page: 15 /24