MBM29F040C Fujitsu Media Devices, MBM29F040C Datasheet - Page 19

• Manufacturer Part Number: MBM29F040C
• Description: 4M (512K X 8) BIT
• Manufacturer: Fujitsu Media Devices

Notes: 1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, inputs may negative
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
WARNING: The recommended operating conditions are required in order to ensure normal operation of the
ABSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING RANGES
Ambient Temperature (T
V
Operating ranges define those limits between which the functionality of the device is guaranteed.
CC
Storage Temperature .................................................................................... –55°C to +125°C
Ambient Temperature with Power Applied .................................................... –40°C to +85°C
Voltage with Respect to Ground All pins except A
V
A
MBM29F040C-55.......................................................................................... +4.75 V to +5.25 V
MBM29F040C-70/-90 ................................................................................... +4.50 V to +5.50 V
CC
9
, OE (Note 2) ............................................................................................. –2.0 V to +13.5 V
2. Minimum DC input voltage on A
Supply Voltages
(Note 1) .................................................................................................. –2.0 V to +7.0 V
overshoot V
+0.5 V. During voltage transitions, outputs may positive overshoot to V
negative overshoot V
pins are +13.5 V which may overshoot to 14.0 V for periods of up to 20 ns.
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
SS
to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and I/O pins is V
A
) ................................................................................ –40°C to +85°C
SS
to –2.0 V for periods of up to 20 ns. Maximum DC input voltage on A
9
and OE pins are –0.5 V. During voltage transitions, A
9
, OE (Note 1).................. –2.0 V to +7.0 V
MBM29F040C
CC
+2.0 V for periods of up to 20 ns.
9
and OE pins may
-55/-70/-90
9
and OE
CC
19