KP464 ETC, KP464 Datasheet - Page 17

• Manufacturer Part Number: KP464
• Description: (KP460 - KP464) Polypropylene film foil capacitors
• Manufacturer: ETC

www.DataSheet4U.com
BCcomponents
CONSTRUCTION
Description
Mounting
N
The capacitors are suitable for vertical or horizontal
mounting on printed-circuit boards. The capacitors packed
on bandoliers are designed for mounting on printed-circuit
boards by means of automatic insertion machines.
2001 Jun 22
ORMAL USE
144x12(halfpage)
Low-inductive wound cell of metal foil and a
polypropylene film
Protected by a hard, water-repellent solvent-resistant blue
epoxy lacquer
Axial iron leads, solder-coated.
Polypropylene film foil capacitors
296x12(full_width)
-0.4
-0.8
(%)
0.4
C/C
www.DataSheet4U.com
0
0
Fig.10 Construction.
polypropylene film
connecting wire
Fig.11
2
C/C as a function of soldering time.
lead - tin foil
CBA371
4
17
S
AND SHOCK
The capacitors shall be mechanically fixed by the leads.
S
The capacitance stability is dependent on the maximum
temperature the capacitor reaches during soldering.
Figure 11 shows the typical effect of C/C as a function of
soldering time under the worst possible mounting
conditions (horizontal on the PCB, minimum possible pitch)
and with 80 C preheating.
Storage temperature
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient free air temperature of 23 1 C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 2%.
For reference testing, a conditioning period shall be applied
over 96 4 hours by heating the products in a circulating air
oven at the rated temperature and a relative humidity not
exceeding 20%.
PECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
OLDERING CONDITIONS
Storage temperature: T
maximum 80% without condensation.
6
stg
8 soldering time (s)
KP 460 to 464
25 to 40 C with RH
www.DataSheet
www.DataSheet4U
www.DataSheet
www.DataSheet
Product specification
CBA372
10
4U
4U
4U.com
.com
.com
.com