SKY77517-21 Skyworks Solutions, SKY77517-21 Datasheet - Page 13

• Manufacturer Part Number: SKY77517-21
• Description: TX-RX iPAC FEM
• Manufacturer: Skyworks Solutions

www.DataSheet4U.com
SKY77517-21 TX–Rx iPAC™ FEM FOR DUAL-BAND GSM/GPRS
Electrostatic Discharge Sensitivity
The SKY77517–21 is a Class 1 device. The ESD testing was
performed in compliance with JEDEC JESD22-A114B Human
Body Model (HBM) and JEDEC JESD22-A115B Machine Model
(MM) requirements.
Various failure criteria can be utilized when performing ESD
testing. Many vendors employ relaxed ESD failure standards that
fail devices only after “the pad fails the electrical specification
limits” or “the pad becomes completely non-functional”.
• Personnel Grounding
• Protective Workstation
- Wrist Straps
- Conductive Smocks, Gloves and Finger Cots
- Antistatic ID Badges
- Dissipative Table Top
- Protective Test Equipment (Properly Grounded)
- Grounded Tip Soldering Irons
- Solder Conductive Suckers
- Static Sensors
200784A • Skyworks Proprietary and Confidential Information • Products and Product Information are Subject to Change Without Notice. • November 6, 2007
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
Skyworks employs stringent criteria, rejecting devices as soon as
the pad begins to show any degradation on a curve tracer.
To avoid ESD damage, both latent and visible, it is very important
that the product assembly and test areas follow the Class 1 ESD
handling precautions listed below.
• Facility
• Protective Packaging and Transportation
- Relative Humidity Control and Air Ionizers
- Dissipative Floors (less than 10
- Bags and Pouches (Faraday Shield)
- Protective Tote Boxes (Conductive Static Shielding)
- Protective Trays
- Grounded Carts
- Protective Work Order Holders
9
Ω to GND)
DATA SHEET
13