USB2660 Standard Microsystems Corp., USB2660 Datasheet - Page 23

• Manufacturer Part Number: USB2660
• Description: Ultra Fast Usb 2.0 Hub And Multi-format Flash Media Controller With Dual Sd Interfaces
• Manufacturer: Standard Microsystems Corp.

Ultra Fast USB 2.0 Hub and Multi-Format Flash Media Controller with Dual SD Interfaces
Datasheet
SMSC USB2660/USB2660i
6.3
Port Power control using a USB Power Switch
The USB2660/USB2660i has a single port power control and over-current sense signal for each
downstream port. When disabling port power, the driver will actively drive a '0'. To avoid unnecessary
power dissipation, the internal pull-up resistor will be disabled at that time. When port power is enabled,
the output driver is disabled, and the pull-up resistor is enabled creating an open drain output.
If there is an over-current situation, the USB Power Switch will assert the open drain OCS signal. The
Schmitt trigger input will detect this event as a low. The open drain output does not interfere. The
internal over-current sense filter handles the transient conditions, such as low voltage, while the device
is powering up.
Port Power Control
Figure 6.1 Port Power Control with USB Power Switch
USB2660/60i
DATASHEET
23
PRTCTL3
PRTCTL2
EN
EN
OCS
OCS
USB Power
USB Power
Switch
Switch
Device
Device
USB
USB
5 V
5 V
Revision 1.0 (06-09-09)