RFP-10-50TVR Anaren Microwave, RFP-10-50TVR Datasheet - Page 2

• Manufacturer Part Number: RFP-10-50TVR
• Description: Flanged Terminations
• Manufacturer: Anaren Microwave

2
www.DataSheet4U.com
Typical Performance
Power Derating
Model RFP-10-50TVR
100
75
50
25
0
25
50
CASE TEMPERATURE — °C
75
Sales Desk Europe: Voice: ([phone] Fax: [phone]
100
Sales Desk USA: Voice: [phone] Fax: [phone]
125
150
Suggested Mounting Procedures
1. Make sure that the devices are mounted on flat surfaces
2. Drill & tap the heatsink for the appropriate thread size to be
3. Coat heatsink with a minimum amount of high quality
4. Position device on mounting surface and secure using
5. Solder leads in place using an SN63 type solder with a
(.001” under the device) to optimize the heat transfer.
used.
silicone grease (.001” max. thickness).
socket head screws, flat & split washers. Torque screws to
the appropriate value. Make sure that the device is flat
against the heatsink. (Care should be taken to avoid
upward pressure of the leads towards the lid).
controlled temperature iron (210°C).
(2 PLACES)
.025
BOARD LOWER
THAN LEAD.
MIN.
SUGGESTED STRESS RELIEF METHODS
SCALE:
BOARD EVEN
WITH LEAD.
BOARD LOWER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE:
BOARD HIGHER
THAN LEAD.