AN1909 Motorola / Freescale Semiconductor, AN1909 Datasheet - Page 14

• Manufacturer Part Number: AN1909
• Description: AN1909 Multiple Target Features Using Code Warrior
• Manufacturer: Motorola / Freescale Semiconductor

Edit Prototype Build Target Settings
Note:
14
Use the new configuration files from the new portion of the project Stationery created earlier for the
prototype build target. Refer to
As shown in
w Click A
configuration is the local project.
These files may be modified to fit the prototype, after the prototype build target is tested in the
External RAM of the EVM.
w Add the config files to this target so it can use them instead of other versions of the files with the
same file name. These configuration files are part of the Stationery and are named:
Files must be named identically to those above in the configproto, configextram, and configflash
build directories. The files are tailored for each of the three build targets:
w Click OK in the window named Please Select an Access Path
A new directory, configproto, will appear, illustrated in
wFind {Project}configproto, the last directory under User Paths in the proto Settings window shown
in
Figure 18
•
•
•
•
•
•
The selected new build target is indicated in the one.mcp screen as proto. This agrees with the
left side of the screen, indicating operation on the proto build target.
linker.cmd
appconfig.c
appconfig.h
proto
extram
flash
dd... to add the configproto access path relative to the project. The prototype
Figure
17, the Add... button is located at the bottom of the proto Settings screen.
Multiple Target Features Using CodeWarrior
Figure 17. configproto Access Path
Figure
16.
Figure
17.