MSR112 ETC, MSR112 Datasheet - Page 2

• Manufacturer Part Number: MSR112
• Description: Port Powered Magnetic Card Reader
• Manufacturer: ETC

MSR112 Simple Manual
SPECIFICATIONS
Recording Method
Swipe Speed
Power Requirements
Operating Temp
Operating Humidity
Magnetic Head Life
Dimensions
Weight
Cable length
Connector
OUTPUT DATA FORMAT
Remarks:
SS = START SENTINEL
ES = END SENTINEL
Note: 1. If read error, the default output data format is <STX><SS>E<ES><ETX> and it can be replaced as either
NOTICE: The issuer of this manual has made every effort to provide accurate information. The issuer should not be
held liable for any technical and editorial omission or errors made herein; nor for incidental consequential damages
resulting from the furnishing, performance or use of this material. This document contains proprietary information that
is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or
translated without the prior written consent of the issuer. The information provided in this manual is subject to change
without notice.
Technical Support: Call 1-888-881-1900
UDC: PM019-S
Single track
Dual track
Triple track
TRACK1= “%” (ISO, DMV & AAMVA)
TRACK2= “;”
TRACK3= “;”
Note: TK3 SS can be replaced to + for ISO, # for AAMVA, and ! for CA old DMV while SS is enable.
TRACK1, 2 & 3= “?”
3. <STX>, <ETX>, <DLE>, SS (start sentinel), ES (end sentinel) and LRC are optional.
2. If no data is read, then display <STX><SS>N<ES><ETX> as default and it can be replaced as output nothing.
<STX><SS>F<ES><ETX> or output nothing.
The <DLE> is programmable by command setting.
<STX><SS>< TRACK 1or 2or 3 DATA><ES><ETX>
<STX><SS>< TRACK 1 or TRACK 2 DATA><ES><DLE>
<SS><TRACK 2 or TRACK 3 DATA><ES><ETX>
<STX><SS><TRACK 1 DATA><ES><DLE><SS><TRACK 2 DATA><ES><DLE>
<SS><TRACK 3 DATA><ES><ETX>
(ISO, DMV & AAMVA)
(ISO)
Two-frequency coherent phase (F2F), compatible with ISO 7811 and AAMVA.
5 to 50 in/sec (worst case with +/- 12% jitter card)
3.3VDC/4.9mA in idle mode; 5.9mA in operating mode
-10°C to +50°C, storage temp: -30°C to +70°C
10% to 85% relative humidity
500K swipes minimum. 500K, 1M option.
3.94 in L x 1.34 in W x 1.10 in H
0.46 Lb.
5 ft
9 pin D-sub female
(ISO, CA old DMV & AAMVA)
“%” (AAMVA)
--- Proprietary and Confidential ---
“!” (CA old DMV)
27-Aug-2001
Page 2 / 2