LM150X06-A4C3 LG Semicon Co., Ltd., LM150X06-A4C3 Datasheet - Page 27
![no-image](/images/no-image-200.jpg)
LM150X06-A4C3
Manufacturer Part Number
LM150X06-A4C3
Description
Liquid Crystal Display
Manufacturer
LG Semicon Co., Ltd.
Datasheet
1.LM150X06-A4C3.pdf
(27 pages)
9-3. Electrostatic Discharge Control
9-4. Precautions for Strong Light Exposure
9-5. Storage
9-6. Handling Precautions for Protection Film
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain
that treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.
Strong light exposure causes degradation of polarizer and color filter.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
(2) The polarizer surface should not come in contact with any other object.
(1) The protection film is attached to the bezel with a small masking tape.
(2) When the module with protection film attached is stored for a long time, sometimes there remains a
(3) You can remove the glue easily. When the glue remains on the Bezel or its vestige is recognized,
When storing modules as spares for a long time, the following precautions are necessary.
Ver. 1.1
temperature between 5°C and 35°C at normal humidity.
It is recommended that they be stored in the container in which they were shipped.
When the protection film is peeled off, static electricity is generated between the film and polarizer.
This should be peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
very small amount of glue still on the Bezel after the protection film is peeled off.
please wipe them off with absorbent cotton waste or other soft material like chamois soaked with
normal-hexane.
Product Specification
Feb. 12, 2003
Liquid Crystal Display
LM150X06-A4C3
27/27