USB2507 SMSC Corporation, USB2507 Datasheet - Page 13
![no-image](/images/no-image-200.jpg)
USB2507
Manufacturer Part Number
USB2507
Description
Integrated USB 2.0 Compatible 7-Port Hub
Manufacturer
SMSC Corporation
Datasheet
1.USB2507.pdf
(44 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
USB2507-ADT
Manufacturer:
Standard
Quantity:
3 248
Company:
Part Number:
USB2507-ADT
Manufacturer:
MAXIM
Quantity:
43
Company:
Part Number:
USB2507-ADT
Manufacturer:
Microchip Technology
Quantity:
10 000
Part Number:
USB2507-ADT
Manufacturer:
SMSC
Quantity:
20 000
Integrated USB 2.0 Compatible 7-Port Hub
Datasheet
SMSC USB2507
VDDCORE3P3
VDDAPLL3P3
VDDAPLL1P8
Internal 1.8V
Analog Test
VDDIO3P3
VDDA3P3
regulator
BUFFER
VDD1P8
voltage
NAME
enable
NAME
VSS
O12
IPD
IPU
IS
&
I
Input.
Input, with a weak Internal pull-down.
Input, with a weak Internal pull-up.
Input with Schmitt trigger.
Output 12mA.
VDDA33PLL
VDDA18PLL
VDD33CR
SYMBOL
SYMBOL
REG_EN
VDDA33
ATEST/
VDD18
VDD33
VSS
Table 4.4 Power, Ground, and No Connect
Table 4.3 Miscellaneous Pins (continued)
Table 4.5 Buffer Type Descriptions
TYPE
TYPE
AIO
DATASHEET
13
This signal is used for testing the analog section of the
chip, and to enable or disable the internal 1.8v regulator.
This pin must be connected to VDDA33 to enable the
internal 1.8V regulator, or to VSS to disable the internal
regulator.
When the internal regulator is enabled, the 1.8V power
pins must be left unconnected, except for the required
bypass capacitors.When the PHY is in test mode, the
internal regulator is disabled and the ATEST pin
functions as a test pin.
+3.3V I/O Power.
If the internal core 1.8V regulator is enabled, then this pin
acts as the regulator input
+1.8V core power.
If the internal regulator is enabled, then VDD18 pin 50
must have a 4.7
capacitor to VSS
+3.3V Filtered analog power for the internal PLL
If the internal PLL 1.8V regulator is enabled, then this pin
acts as the regulator input
+1.8V Filtered analog power for internal PLL.
If the internal regulator is enabled, then this pin must
have a 4.7
to VSS
+3.3V I/O power.
+3.3V Filtered analog power.
Ground.
DESCRIPTION
μ
F (or greater) ±20% (ESR <0.1
μ
F (or greater) ±20% (ESR <0.1
FUNCTION
FUNCTION
Revision 2.1 (12-06-06)
Ω)
capacitor
Ω)