FH26-25S-0.3SHW Hirose Electric, FH26-25S-0.3SHW Datasheet - Page 10

• Manufacturer Part Number: FH26-25S-0.3SHW
• Description: 0.3mm Contact Pitch/ 1mm above the board/ Flexible Printed Circuit ZIF Connectors
• Manufacturer: Hirose Electric

10
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
S
S
S
Precautions When Inserting or Coupling FPC
Pay attention to the following points when inserting FPC.
S
Handling before mounting on PCB
Actuator operation
PC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
PC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
1
2
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
Axis of rotation
Damage
Actuator
Assure free rotation of
the actuator
Precautions
Damage to the contacts
Connector
PCB
Axis of rotation