CMP389F55563 World Products, Inc., CMP389F55563 Datasheet - Page 10
![no-image](/images/no-image-200.jpg)
CMP389F55563
Manufacturer Part Number
CMP389F55563
Description
Ac And Pulse Metallized Polypropylene Film Capacitors
Manufacturer
World Products, Inc.
Datasheet
1.CMP389F55563.pdf
(16 pages)
Pilkor components
AC and Pulse
Metallized Polypropylene film capacitors
CONSTRUCTION
Description ;
. Low - inductive wound cell of metallized polypropylene (PP) film.
. Potted with blue epoxy resin in a blue flame-retardant polypropylene case.
. Radial leads, tin-coated.
. Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board.
MOUNTING
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoilers
are designed for mounting on printed-circuit boards by means of automatic insertion machines.
. For pitches of 15 mm the capacitors shall be mechanically fixed by the leads.
. For larger pitches the capacitors shall be mounted in the same way and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
The maximum length and width of film capacitors are shown in the following drawing ;
- Eccentricity as in drawing.
- Product height with seating plane as given by IEC 60717 as reference : h
NORMAL USE
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATIONAND SHOCK
The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.
Eccentricity
Imax = I +0.3 mm
MKP mtallized polypropylene film
metal spray layer
connecting wire
170
b max = b + 0.3mm
max
≤ h+0.3mm
PCMP 389