CMPA0060005F Cree, Inc., CMPA0060005F Datasheet - Page 5

• Manufacturer Part Number: CMPA0060005F
• Description: 5 W, 20 Mhz - 6000 Mhz, Gan Mmic Power Amplifer
• Manufacturer: Cree, Inc.

General Device Information
GHz. The amplifier typically provides 17 dB of small signal gain and 5 W saturated output power with an associated
power added efficiency of better than 20 %. The wideband amplifier’s input and output are internally matched to 50
Ohm. The amplifier requires bias from appropriate Bias-T’s, through the RF input and output ports.
to enable gold bond wire attach at the next level assembly.
bond wires. The CMPA0060005F-TB and the device were then measured using external Bias-T’s, (Tecdia: TBT-03M1),
as shown in Figure 2. The Bias-T’s were included in the calibration of the test system. All other losses associated with
the test fixture are included in the measurements.
Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc. Other trademarks, product and company names are the property of their respective
owners and do not imply specific product and/or vendor endorsement, sponsorship or association.
5
The CMPA0060005F is a GaN HEMT MMIC Distributed Driver Amplifier, which operates between 20 MHz - 6.0
The CMPA0060005F is provided in a flange package format. The input and output connections are gold plated
The measurements in this data sheet were taken on devices wire-bonded to the test fixture with 2 mil gold
RF In
CMPA0060005F Rev 0.2, Preliminary
Figure 2. Typical test system setup required for measuring CMPA0060005F-TB
Input Bias T
V
GG
CMPA2560002F mounted
CMPA0060005F
in the test fixture
Output Bias T
V
DD
RF Out
USA Tel: [phone]
www.cree.com/wireless
Fax: [phone]
Durham, NC 27703
4600 Silicon Drive
Cree, Inc.