SSTU32864 Philips Semiconductors, SSTU32864 Datasheet - Page 17

no-image

SSTU32864

Manufacturer Part Number
SSTU32864
Description
1.8V confgurable registered buffer
Manufacturer
Philips Semiconductors
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
SSTU32864AHLF
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
Part Number:
SSTU32864AHLFT
Manufacturer:
IDT, Integrated Device Technology Inc
Quantity:
10 000
Part Number:
SSTU32864EC
Manufacturer:
NAIS
Quantity:
348
Part Number:
SSTU32864EC/G,557
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Part Number:
SSTU32864EC/G@518
Quantity:
3 500
Philips Semiconductors
13. Revision history
Table 11:
9397 750 13339
Objective data
Rev Date
01
20040712
Revision history
CPCN
-
[3]
[4]
[5]
[6]
[7]
[8]
[9]
Description
Objective data (9397 750 13339)
These transparent plastic packages are extremely sensitive to reflow soldering conditions and must
on no account be processed through more than one soldering cycle or subjected to infrared reflow
soldering with peak temperature exceeding 217 C
oven. The package body peak temperature must be kept as low as possible.
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom
side, the solder cannot penetrate between the printed-circuit board and the heatsink. On versions with
the heatsink on the top side, the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave
direction. The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it
is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP, TSSOP, VSO and VSOP packages with a pitch (e) equal to or
larger than 0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than
0.5 mm.
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered
pre-mounted on flex foil. However, the image sensor package can be mounted by the client on a flex
foil by using a hot bar soldering process. The appropriate soldering profile can be provided on
request.
Hot bar soldering or manual soldering is suitable for PMFP packages.
1.8 V configurable registered buffer for DDR2 RDIMM applications
Rev. 01 — 12 July 2004
10 C measured in the atmosphere of the reflow
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
SSTU32864
www.DataSheet4U.com
17 of 19

Related parts for SSTU32864