EK43204-02 Peregrine Semiconductor Corp., EK43204-02 Datasheet - Page 2

• Manufacturer Part Number: EK43204-02
• Description: Specifications: Type: Attenuator ; Supplied Contents: Board ; For Use With/Related Products: PE43204 ; Frequency: 50MHz ~ 3GHz ; Lead Free Status: Lead Free ; RoHS Status: RoHS Compliant
• Manufacturer: Peregrine Semiconductor Corp.

Hardware Setup, continued
2. Connect the cable harness to J1 and the 4-pin
3. Set J3 to +3.3V. For the PE43703, set J2
4. Refer to applications information in datasheet
5. Ensure Network Analyzer is properly
Instructions to use the DSA Evaluation Software
Software Setup
1. Download the installation file from the
2. Unzip the package and double click setup.exe.
3. Restart your computer once installation is
4. Verify default location as:
Open the installed software as shown below.
Figure 3. DSA Evaluation Software Location
1. On your PC, go to the Start menu
2. Select All Programs
3. Select the Peregrine Semiconductor Software folder
4. Select the DSA Evaluation Software software
For applications support, please email [e-mail]
Page 2 of 6
1
Serial Header on the Evaluation Board as
seen below, with the other end of the cable
connected to the PC printer (LPT1) port (see
Figure 2).
to -2.7V or GND. Turn off all power supplies
prior to connecting cables to EVB.
for desired programming mode.
calibrated prior to measurement.
Peregrine Semiconductor website
(www.psemi.com).
complete.
C:\Program Files\DSA Evaluation Software.
2
3
Supporting Document for 78-0012-01 │ UltraCMOS™ RFIC Solutions
Figure 2. Connecting the Ribbon Cable
©2008 Peregrine Semiconductor Corp. All rights reserved.
Harness to the EVB
4
PE43X0X DSA
EVK User's Guide