HFBR1462TA Agilent(Hewlett-Packard), HFBR1462TA Datasheet - Page 9

• Manufacturer Part Number: HFBR1462TA
• Description: Low Cost/ Miniature Fiber Optic Components with ST/ SMA/ SC and FC Ports
• Manufacturer: Agilent(Hewlett-Packard)

Options
In addition to the various port
styles available for the HFBR-
0400 series products, there are
also several extra options that
can be ordered. To order an
option, simply place the corre-
sponding option number at the
end of the part number. For
instance, a metal-port option SMA
receiver would be HFBR-2406M.
You can add any number of
options in series at the end of a
part number. Please contact your
local sales office for further
information or browse HP’s fiber
optics home page at http://
www.hp.com/go/fiber
Option T (Threaded Port
Option)
• Allows ST style port com-
• Compatible with all current
• Mechanical dimensions are
• Maximum wall thickness when
• Available on all ST ports
Option C (Conductive Port
Receiver Option)
• Designed to withstand electro-
• Significantly reduces effect of
54
ponents to be panel mounted.
makes of ST multimode
connectors
compliant with MIL-STD-
83522/13
using nuts and washers from
the HFBR-4411 hardware kit is
2.8 mm (0.11 inch)
static discharge (ESD) of 25kV
to the port
electromagnetic interference
(EMI) on receiver sensitivity
• Allows designer to separate the
• Recommended for use in noisy
• Available on SMA and threaded
Option M (Metal Port Option)
• Nickel plated aluminum con-
• Designed to withstand electro-
• Significantly reduces effect of
• Allows designer to separate the
• Recommended for use in very
• Available on SMA, FC, ST, and
Option K (Kinked Lead
Option)
• Grounded outside 4 leads are
• Allows components to stay
signal and conductive port
grounds
environments
ST port style receivers only
nector receptacle
static discharge (ESD) of 15kV
to the port
electromagnetic interference
(EMI) on receiver sensitivity
signal and metal port grounds
noisy environments
threaded ST ports
“kinked”
anchored in the PCB during
wave solder and aqueous wash
processes
Options TA, TB, HA, HB
(Active Device Mount
Options)
(These options are unrelated to
the threaded port option T.)
• All metal, panel mountable
• Available for HFBR-14X4, 24X2
• Choose from diamond or
• TA = Square pinout/straight
Duplex Option
In addition to the standard
options, some HFBR-0400 series
products come in a duplex con-
figuration with the transmitter on
the left and the receiver on the
right. This option was designed
for ergonomic and efficient
manufacturing. The following
part numbers are available in the
duplex option:
HFBR-5414 (Duplex ST)
HFBR-5414T (Duplex Threaded
HFBR-54E4 (Duplex SC)
package with a 3 or 4 pin
receptacle end
and 24X6 components
square pinout, straight or bent
leads ADM Picture
TB = Square pinout/bent leads
HA = Diamond pinout/straight
HB = Diamond pinout/bent
ST)
leads
4 5
3 6
2 7
4 5
3 6
2 7
1 8
1 8
leads
leads