AB11AB-FA Nihon Kaiheiki Industry, AB11AB-FA Datasheet - Page 2

no-image

AB11AB-FA

Manufacturer Part Number
AB11AB-FA
Description
Process Sealed Subminiature Pushbuttons
Manufacturer
Nihon Kaiheiki Industry
Datasheet
General Specifications
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
PCB Processing
Standards & Certifications
Nominal Operating Force:
Operating Temp Range:
Cap Installation Force:
Insulation Resistance:
Stationary Contacts:
or CSA Certification:
Contact Resistance:
Dielectric Strength:
Movable Contact:
Support Bracket:
Mechanical Life:
Contact Timing:
UL Recognition
Case Housing:
Electrical Life:
Logic Level:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Plunger:
Travel:
Shock:
Manual Soldering: See Profile B in Supplement section.
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
50,000 operations minimum
50,000 operations minimum
2.55N
Nonshorting (break-before-make)
Pretravel .028” (0.7mm); Overtravel .016” (0.4mm); Total Travel .043” (1.1mm)
Polyacetal
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Brass with gold plating
Brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
49.03N (11.2 lbf) maximum downward force on actuator
Wave Soldering Recommended: See Profile A in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
The AB Series pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
Process Sealed Subminiature Pushbuttons
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Series AB
03-07

Related parts for AB11AB-FA