BIM-418-10 Radiometrix, BIM-418-10 Datasheet - Page 9

• Manufacturer Part Number: BIM-418-10
• Description: Low Power UHF Data Transceiver Module
• Manufacturer: Radiometrix

The BiM-418-40 is type approved in the UK to MPT1340 for use in Telemetry, Telecommand and In-
Building alarm applications.
CONFORMANCE to MPT1340 REQUIRES THAT:
1. The transmitting antenna must be one of the 3 variants given in the data sheet. Antenna structures
2. The module must be directly and permanently connected to the transmitting antenna without the
3. The module must not be modified nor used outside it's specification limits.
4. The module may only be used to send digital or digitised data. Speech / music are not permitted.
5. The equipment in which the module is used must carry an inspection mark located on the outside of
6. Products intended for UK commercial application must be notified to the Radiocommunications
OEM Manufacturers incorporating the BiM-418-F transceiver as a component part of their product are
authorised by Radiometrix Ltd to quote our type-approval.
MPT 1340 is the type approval specification issued by the RA and may be obtained from the RA's library
service on [phone] / 0505.
Radiometrix Ltd, BiM Data Sheet
which yield ERP gain are not permitted.
use of an external feeder. Increasing the RF power level by any means is not permitted.
the equipment and be clearly visible. The minimum dimensions of the inspection mark shall be 10 x
15 mm and the letter and figure height must be no less than 2mm. The wording shall read:
MPT 1340 W.T. LICENCE EXEMPT ".
Agency (RA) on form RA 249 ( Cat I), obtainable from the RA's library service, Tel: [phone]
0502 / 0505
page 9
"