BIM3A Radiometrix, BIM3A Datasheet - Page 9

• Manufacturer Part Number: BIM3A
• Description: 869/914mhz high Speed FM Radio Transceiver Module
• Manufacturer: Radiometrix

Type Approval requirements: Europe
The modules comply with the requirements of the R&TTE Directive (including standards EN 300 220-3
and EN 301 489-3) when used in accordance with the information contained herein. The following
provisos apply:
Type Approval requirements: USA
The Radiometrix BiM3A module is sold as a component device requiring external components
and connections to function. It is designed to comply with FCC Part 15.249 regulations,
however it is not approved by the FCC. The purchaser understands that FCC approval will be
required prior to the sale or operation of any device containing this module.
Radiometrix Ltd, BiM3A Data Sheet
1) The modules must not be modified or used outside their specification limits.
2) The modules may only be used to transfer digital or digitised data. Analogue speech and/or
3) The equipment in which the BiM3 is used must carry all necessary external labelling to meet
4) The BiM3 has not been tested with antennas having gains greater than that of a quarter-wave
1) Antennas must be either permanently attached (i.e. non-removable) or must use a connector
2) The user must ensure that the BiM3A/antenna combination does not radiate more than the
3) The appropriate FCC identifying mark and/or part 15 compliance statement must be clearly
music are not permitted.
the requirements of the R&TTE directive.
whip. The use of such antennas may require further R&TTE approval.
which is unique or not commonly available to the public.
maximum permitted field strength of 50mV/m at 3m distance (FCC Part 15.249). This is
equivalent to an effective radiated power (ERP) of 0.75mW (-1.25dBm) approx.
visible on the outside of the equipment containing the module(s).
page 9