LPC2119 Philips Semiconductors (Acquired by NXP), LPC2119 Datasheet - Page 18

• Manufacturer Part Number: LPC2119
• Description: Single-chip 16/32-bit Microcontrollers; 128/256 KB Isp/iap Flash With 10-bit ADC And CANthe LPC2119/LPC2129 Are Based on a 16/32 Bit ARM7TDMI-STM Cpu With Real-time Emulation And Embedded Trace Support, Together With 128/256 Kilobytes (kB) of Embedde
• Manufacturer: Philips Semiconductors (Acquired by NXP)

Philips Semiconductors
9397 750 12806
Preliminary data
6.15.1 Features
6.16.1 Features
6.15 SPI serial I/O controller
6.16 General purpose timers
The LPC2119/LPC2129 each contain two SPIs. The SPI is a full duplex serial
interface, designed to be able to handle multiple masters and slaves connected to a
given bus. Only a single master and a single slave can communicate on the interface
during a given data transfer. During a data transfer the master always sends a byte of
data to the slave, and the slave always sends a byte of data to the master.
The Timer is designed to count cycles of the peripheral clock (PCLK) and optionally
generate interrupts or perform other actions at specified timer values, based on four
match registers. It also includes four capture inputs to trap the timer value when an
input signal transitions, optionally generating an interrupt. Multiple pins can be
selected to perform a single capture or match function, providing an application with
‘or’ and ‘and’, as well as ‘broadcast’ functions among them.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Easy to configure as Master, Slave, or Master/Slave.
Programmable clocks allow versatile rate control.
Bidirectional data transfer between masters and slaves.
Multi-master bus (no central master).
Arbitration between simultaneously transmitting masters without corruption of
serial data on the bus.
Serial clock synchronization allows devices with different bit rates to communicate
via one serial bus.
Serial clock synchronization can be used as a handshake mechanism to suspend
and resume serial transfer.
The I
Compliant with Serial Peripheral Interface (SPI) specification.
Synchronous, Serial, Full Duplex, Communication.
Combined SPI master and slave.
Maximum data bit rate of one eighth of the input clock rate.
A 32-bit Timer/Counter with a programmable 32-bit Prescaler.
Four 32-bit capture channels per timer that can take a snapshot of the timer value
when an input signal transitions. A capture event may also optionally generate an
interrupt.
Four 32-bit match registers that allow:
– Continuous operation with optional interrupt generation on match.
2
C bus may be used for test and diagnostic purposes.
Rev. 02 — 02 February 2004
Single-chip 16/32-bit microcontrollers
LPC2119/LPC2129
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
18 of 36