SD834-04-TE12R Fuji Electric holdings CO.,Ltd, SD834-04-TE12R Datasheet - Page 8

• Manufacturer Part Number: SD834-04-TE12R
• Description: Silicon Diode
• Manufacturer: Fuji Electric holdings CO.,Ltd

Fuji Electric Device Technology Co.,Ltd.
7.Appendix
・If you have any questions about any part of this Specification, please contact Fuji Electric Device
・Neither Fuji nor its agents shall be held liable for any injury caused by using the products not in
・The application examples described in this specification are merely typical uses of Fuji Electric
Technology or its sales agent before using the product
accordance with the instructions.
DeviceTechnology products.
・This products does not contain Class-I ODS and Class-II ODS substances set force by ‘Clean Air
Storage
・This products does not contain PBBs (Polybrominated Biphenyl) or PBDEs (Polybrominated
This specification does not confer any industrial property rights or other rights, nor constitute a
license for such rights.
Act of US’ law.
Diphenyl Ether ) , substances.
・The Diodes must be stored at a standard temperature of 5 to 35℃ and relative humidity of 45
・The Diodes should not be subjected to rapid changes in temperature to avoid condensation on
・The Diodes should not be stored on top of each other, since this may cause excessive external
・The Diodes should not be stored with the lead terminals remaining unprocessed. Rust may
・The Diodes should be stored in antistatic containers or shipping bags.
the surface of the Diodes. Therefore, store the Diodes in a place where the temperature is
steady.
force on the case.
cause presoldered connections to go fail during later processing.
to 75%.If the storage area is very dry, a humidifier may be required. In such a case, use only
deionized water or boiled water, since the chlorine in tap water may corrode the leads.
MS5D2342
8/12
H04-004-03a