LM2601MTCEVAL National Semiconductor Corporation, LM2601MTCEVAL Datasheet

no-image

LM2601MTCEVAL

Manufacturer Part Number
LM2601MTCEVAL
Description
LM2601 - Adapter Interface Circuit Not Recommended For Designs , Package: Tssop, Pin Nb=14
Manufacturer
National Semiconductor Corporation
Datasheet
© 2001 National Semiconductor Corporation
LM2601
Adapter Interface Circuit
General Description
The Adapter Interface Circuit (AIC) is used to sense the
presence of an external power source for a portable com-
puter. It notifies the computer if a source is present and
indicates if the source is appropriate for charging battery
packs inside the computer. The AIC also senses an adapter
current and its direction. AIC isolates the adapter and signals
the computer when peak current threshold is exceeded.
LM2601 drives P-channel FETs. No high current rated
Schottky diode is required to implement an adapter switcho-
ver circuit. This significantly decreases additional heat dissi-
pation during simultaneous fast battery charging while run-
ning a computer, particularly in Maximum Performance
mode of operation
Features
n Detects an AC-DC adapter suitable for battery charging
n Allows the implementation of intelligent switchover
Block Diagram
or an airplane or car power line adapter that should not
be used for battery charging
circuits for portable systems
DS101309
n LM2601 shuts down automatically when adapter is
n Low leakage current from battery when not powered
n Drives P-channel FETs, no Schottky diodes are required
n No reverse inrush current from battery into the adapter
n Allows for battery capacity gas-gauge calibration under
n Adapter over current threshold programmable with
n Wide input range: 5V - 24V
n Available in TSSOP-14 package
Applications
n Portable Computers
n Portable IAs (Internet Appliances, Information
n Other Battery Powered Devices
removed
output capacitance
system software/firmware control
external resistors
Appliances)
10130901
www.national.com
April 2001

Related parts for LM2601MTCEVAL

Related keywords