GS1559 Gennum Corp., GS1559 Datasheet - Page 6

• Manufacturer Part Number: GS1559
• Description: GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver
• Manufacturer: Gennum Corp.

1.2 Pin Descriptions
Table 1-1: Pin Descriptions
F2, F3, F7,
A8, E8, K8
Number
J2, J3, J4,
G2, G3,
G7, H3,
A6, B5,
B6, C4,
C5, D2,
D3, D7,
E3, E7,
A4, A5
Pin
A1
A2
A3
A7
VCO_GND
VCO_VCC
VCO, VCO
IO_VDD
Name
PCLK
NC
LF
30572 - 4
Timing
Analog
Analog
–
–
–
–
–
July 2005
Output
Output
Output
Output
Power
Power
Power
Type
Input
–
Description
Control voltage to external voltage controlled oscillator. Nominally +1.25V
DC.
Power supply for the external voltage controlled oscillator. Connect to pin 7
of the GO1525. This pin is an output.
Should be isolated from all other power supplies.
Ground reference for the external voltage controlled oscillator. Connect to
pins 2, 4, 6, and 8 of the GO1525. This pin is an output.
Should be isolated from all other grounds.
Differential inputs for the external VCO reference signal. For single ended
devices such as the GO1525, VCO should be AC coupled to VCO_GND.
VCO is nominally 1.485GHz.
No Connect.
PARALLEL DATA BUS CLOCK
Signal levels are LVCMOS/LVTTL compatible.
HD 20-bit mode
HD 10-bit mode
SD 20-bit mode
SD 10-bit mode
Power supply connection for digital I/O buffers. Connect to +3.3V DC
digital.
PCLK = 74.25MHz or 74.25/1.001MHz
PCLK = 148.5MHz or 148.5/1.001MHz
PCLK = 13.5MHz
PCLK = 27MHz
GS1559 Data Sheet
6 of 74