GS1510 Gennum Corporation, GS1510 Datasheet - Page 7

• Manufacturer Part Number: GS1510
• Description: Hd-linx (tm) THDTV Serial Digital Deformatter
• Manufacturer: Gennum Corporation

1.2 PIN DESCRIPTIONS
GENNUM CORPORATION
99,100,101
92, 96, 97,
NUMBER
103, 104,
105, 106,
107, 108,
111, 112,
113, 114,
117, 118,
121, 122,
123, 124,
119,120,
125, 126
95, 102
PIN
98,
66
67
70
DATA_IN [19:0]
SAV_ERR
EAV_ERR
NAME
TEST
GND
(Continued)
(Continued)
(Continued)
(Continued)
V
DD
Synchronous
Synchronous
Synchronous
wrt PCLK_IN
wrt PCLK_IN
wrt PCLK_IN
TIMING
N/A
N/A
Output
Output
TYPE
TEST
Input
N/A
N/A
7
Status Signal Output. Indicates a TRS error or a mismatch between
the embedded TRS and the flywheel TRS when the flywheel is
enabled. This signal is set high when an error in the SAV TRS is
detected or when the internal flywheel indicates there is a
mismatching SAV TRS. Refer to Fig. 3 for timing information of
SAV_ERR relative to LUMA (DATA_OUT[19:10]) and CHROMA
(DATA_OUT [9:0]).
Status Signal Output. Indicates a TRS error or a mismatch between
the embedded TRS and the flywheel TRS when the flywheel is
enabled. This signal is set high when an error in the EAV TRS is
detected or when the internal flywheel indicates there is a
mismatching EAV TRS. Refer to Fig. 3 for timing information of
EAV_ERR relative to LUMA (DATA_OUT[19:10]) and CHROMA
(DATA_OUT [9:0]).
Test pin. Used for test purposes only. This pin must be connected to
GND for normal operation.
Must be connected to V
Must be connected to GND for normal operation.
Input data bus. DATA_IN [19] is the MSB of the signal (pin 103).
DATA_IN [0] is the LSB of the signal (pin 126).
This data is typically scrambled and not word aligned.
DD
DESCRIPTION
for normal operation.
52247 - 3