MP2307DN Monolithic Power Systems, MP2307DN Datasheet - Page 5

no-image

MP2307DN

Manufacturer Part Number
MP2307DN
Description
3A, 23V, 340khz Synchronous Rectified Step-down Converter
Manufacturer
Monolithic Power Systems
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MP2307DN
Manufacturer:
MPS
Quantity:
20 000
Part Number:
MP2307DN-LF
Manufacturer:
TOS
Quantity:
358
Part Number:
MP2307DN-LF-Z
Manufacturer:
MPS
Quantity:
44
Part Number:
MP2307DN-LF-Z
Manufacturer:
MPS
Quantity:
1 010
Part Number:
MP2307DN-LF-Z
Manufacturer:
MPS
Quantity:
20 000
Part Number:
MP2307DN-LF-Z
0
Company:
Part Number:
MP2307DN-LF-Z
Quantity:
25 000
PIN FUNCTIONS
MP2307 Rev. 1.7
3/14/2006
Pin #
1
2
3
4
5
6
7
8
COMP
Name
GND
SW
EN
BS
FB
SS
IN
TM
MP2307 – 3A, 23V, 340KHz SYNCHRONOUS RECTIFIED STEP-DOWN CONVERTER
Description
High-Side Gate Drive Boost Input. BS supplies the drive for the high-side N-Channel MOSFET
switch. Connect a 0.01µF or greater capacitor from SW to BS to power the high side switch.
Power Input. IN supplies the power to the IC, as well as the step-down converter switches.
Drive IN with a 4.75V to 23V power source. Bypass IN to GND with a suitably large capacitor
to eliminate noise on the input to the IC. See Input Capacitor.
Power Switching Output. SW is the switching node that supplies power to the output. Connect
the output LC filter from SW to the output load. Note that a capacitor is required from SW to
BS to power the high-side switch.
Ground (Connect the exposed pad to Pin 4).
Feedback Input. FB senses the output voltage and regulates it. Drive FB with a resistive
voltage divider connected to it from the output voltage. The feedback threshold is 0.925V. See
Setting the Output Voltage.
Compensation Node. COMP is used to compensate the regulation control loop. Connect a
series RC network from COMP to GND. In some cases, an additional capacitor from COMP to
GND is required. See Compensation Components.
Enable Input. EN is a digital input that turns the regulator on or off. Drive EN high to turn on
the regulator; low to turn it off. Attach to IN with a 100kΩ pull up resistor for automatic startup.
Soft-Start Control Input. SS controls the soft-start period. Connect a capacitor from SS to GND
to set the soft-start period. A 0.1µF capacitor sets the soft-start period to 15ms. To disable the
soft-start feature, leave SS unconnected.
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.
www.MonolithicPower.com
5

Related parts for MP2307DN